Need help on a NE pardner 20ga

[Chaser]

I have a New England pardner single shot 20ga that the firing pin is not hitting the primer on. The hammer cocks you pull the trigger the hammer falls but it isn't hitting the firing pin or the firing pin is broken, there is no mark what so ever an the primmer.

What I need to know is how to disassemble the receiver.

[paintballmagnet]

Don't! You have to drive out the pins for takedown and holding the parts in place while putting them back in can be a royal pain! Any 'smith should be able to fix her for a nominal fee, or you can send her back to NE. Is your transfer bar still there? I've seen those snapped off as much as I've seen firing pin problems.