Support this site with your Contribution. Click on the Membership link below.
Home | Discussion Forums | Mission Statement | Membership | Links | Contact Us | Rules |

Assaultweb.net Forums  

Go Back   Assaultweb.net Forums > Gun Talk > Main Battle Rifles

Reply
 
Thread Tools
  #1  
Old July 24th, 2010, 01:01 PM
Floyd's Avatar
Floyd Floyd is offline
 
Join Date: Jun 2000
Location: Kentucky
Posts: 738
Icon41 DSA Speed Trigger and Robar NP3 Treatment?

SA58 Speed Trigger Upgrade
Part# LABOR21 $149.95
SA58 Speed Trigger Upgrade provides a shorter, crisper, lighter and improved trigger control without sacrificing safety and reliability. A perfect upgrade for the Three Gun or Action Shooter who requires the utmost speed, as well as safety and accuracy. The trigger pull weight is typically between 3-4.5 lbs., compared to the military 8-12 lbs. Offered on SA58 rifle builds only.

Robar NP3 Surface Treatment Upgrade
Part# NP3 $149.00
non-reflective coating with high lubricity, low friction and a micro hardness of 48-51RCD. NP3 is corrosion and peel resistant and permits firing for longer periods of time between cleanings. Cleaning an NP3 treated surface requires only a soft cloth with no lubrication. For SA58 and DS ZM4 AR Rifle Builds only.

Anybody have these done to their DSA SA58? Is it worth the money?
__________________
Kentucky Colonel - Kentucky Proud; NRA Endowment member; GOA Life member; KC3 member...
Retired Army - PRO PATRIA VIGILANS - Go Signal!
Reply With Quote
  #2  
Old July 24th, 2010, 06:09 PM
paintballmagnet's Avatar
paintballmagnet paintballmagnet is offline
Executive Member
 
Join Date: Oct 2000
Location: L. A. (lower Arkansas)
Posts: 13,639
Default Re: DSA Speed Trigger and Robar NP3 Treatment?

The trigger must be new, have not seen anything on these. Sounds good but like many aftermarket FAL parts through the years, I'll have to see how they work long term before I invest in a set. As for the Robar finish, its as good, possbly better than any on the market today. I would suggest you also take a look at MAC's Tough Gun finish also. (Mac's Shootin' Irons, IIRC)
__________________
Why it's called the "American Dream" is because you gotta be asleep to believe it! George Carlin

Careful who you kick on your way up, they'll kick you twice on your way down!
Reply With Quote
  #3  
Old July 25th, 2010, 09:47 AM
guncrazy
Guest
 
Posts: n/a
Default Re: DSA Speed Trigger and Robar NP3 Treatment?

If you want a light trigger pull then send your H,T,S, over to moses at the fafiles.com. Cost you about half of what DSarms wants.
Reply With Quote
  #4  
Old October 30th, 2010, 10:23 AM
Floyd's Avatar
Floyd Floyd is offline
 
Join Date: Jun 2000
Location: Kentucky
Posts: 738
Icon41 Re: DSA Speed Trigger and Robar NP3 Treatment?

I just got my rifle back from DSA. I had them do the speed trigger job and black duracoat. NP3 was too gray for me on an FAL. I haven't been shooting yet, but the trigger pull is much better.
__________________
Kentucky Colonel - Kentucky Proud; NRA Endowment member; GOA Life member; KC3 member...
Retired Army - PRO PATRIA VIGILANS - Go Signal!
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:41 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2002 to 2008 Assaultweb.net