Announcement

Collapse
No announcement yet.

Lanolin for case sizing.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lanolin for case sizing.

    Has anyone tried using the lanolin and alcohol as a case sizing lube? I tried a batch and it works well. Just spray it on and resize. I have then been tossing them in the sonic cleaner after resizing then tossing them in a towel and rub dry. Does anyone have problems with feeding or anything else using this method?
    Almighty God! I know not what course others may take; but as for me, give me liberty or give me death!
    Patrick Henry

    The laws allow arms to be taken against an armed foe. Ovid

  • #2
    Re: Lanolin for case sizing.

    I can't see any reason it wouldn't work. Non-Stick cooking spray works, if you don't have anything else handy. (Ask me how I know that. )

    The primary objective of using a resizing lube is to protect the resizing die, actually, and make it take less effort to get the casings back out of the die. Anything that slicks the casings up a bit is effective, and cleaning after depriming/resizing is what I do to get rid of the case lube.

    The only serious up side to a purpose formulated resizing lube as opposed to anything else is that it's not going to mess with your powder if you leave some inside the casing. An oil based lube residue left inside the casing will not make your shelf-life very promising.

    So be extra fussy about cleaning if you are not using standard resizing lubes. Other than that part, it's all in what you have to hand.

    Alle Kunst ist umsunst Wenn ein Engel auf das Zundloch brunzet (All skill is in vain if an angel pisses down the touch-hole of your musket.) Old German Folk Wisdom.

    Comment

    Working...
    X