1 of 4 < >

Check 'Display Signatures' in user area.

If you want to see signatures at the bottom of member's posts, check your user area and make sure this box is checked. The default mode is 'Off'.
2 of 4 < >

Strike Through Text Option now on-line

You may now use the Strike Through option in the post text editor.

There is a square blank button located at the end of the options on the right. I could not get the 'S' to show up, but the button still works.
3 of 4 < >

Reload your Avatars

If you wish to have your avatar visible again you will have to reload it to the board. The old avatars did not transfer to the new file system.

Stay tuned for more.
4 of 4 < >

Contributor Status Titles

Gentlemen, Assault Web greatly appreciated your monetary contributions to keep this forum alive and running as we make the transition to a new server and upgraded software.

I have been working to upgrade title for those members who have made a monetary contribution to the form. Unfortunately, I have been met by some resistance to comply by the forum software and I am unable to make these administrative changes.

Your donations have been duly noted and at such time the forum software is upgraded, so will your status.

The Back Room
See more
See less

Need Help Finding Olde Tyme Scope Mount ;)

  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Help Finding Olde Tyme Scope Mount ;)

    Hi everybody!
    Looking for a vintage/obsolete scope mount for an old Remington Model 550-1 .22 semi-auto rifle. They were the "side-mount' type held on with 4 screws. I've seen plenty that take the 3/4 inch, toy IMHO, scope. Those were numbered N2, N3, N4, etc.
    I'm looking for one that will take a one inch scope. I have a nice older Weaver K-4 that would look retro cool on the rifle. I wont feel like I'm sighting down a straw.
    If necessary I'd consider one that was butt-ugly. So long as it was straight and true. Refinishing it would be no problemo.
    Thank you for your time.
    Paul the Ammo Guy 8-)

    "Aim small, miss small".

  • #2
    Re: Need Help Finding Olde Tyme Scope Mount

    Good luck with that!

    I've got a few of the old Redfield and Weaver 3/4" side plate mounts and I can't recall seeing any 1" types at the local gun shows. I have a very first rifle! I own a bunch of old Remington's right up to the 40-X and XB, but no 550.

    Weaver does still manufacture a side mount base setup, but I have no idea if it could be adapted to fit your 550.


    • #3
      Re: Need Help Finding Olde Tyme Scope Mount

      Try Gun parts corp
      Or Springfield sporters
      Both are on the net.

      Keep those e-mails and calls to your Congress people coming.