Announcement

Collapse
No announcement yet.

Colt Peacemaker clone

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Colt Peacemaker clone

    Wifey wants a Colt Peacemaker. I can't justify the money for a real one when she's going to shoot it a few times and put it in the safe, and she agrees. I know there are clones out there, but I don't know the brand. She thinks she wants to stay with .45 long colt ammo. Is there anything out there?

  • #2
    Re: Colt Peacemaker clone

    Uberti Cattleman.
    http://www.uberti.com/firearms/singl...-cattleman.php

    They have many barrel lengths and finish variations.
    You can pick and choose your Peacemaker's look.
    They also sell matched sets.

    I want one or 2 in 45 long colt (to be traditional) in 5.5" barrel with case hardened frame.

    This, but in a 5.5" barrel.
    http://www.uberti.com/firearms/image...m_steel_lg.jpg


    BISHOP
    The rusty wire, that holds the cork, that keeps the anger in, gives way...

    Comment


    • #3
      Re: Colt Peacemaker clone

      The better quality clones are made by Uberti, and sold under their own name or by importers.

      Uberti will flex the quality of the finish according to what price point an importer will sell at, but you have to compare the levels side by side to see the difference.

      The better quality are sold by Uberti, Cimarron Arms, and Navy Arms. Lower quality finish models are sold by companies like EMF and Dixie Gun Works.

      Comment


      • #4
        Re: Colt Peacemaker clone

        How close of clone do you want.

        The Ruger Vaquero looks identical and can be had for around $500 new.




        They are however much different internally and are basically a modern revolver that looks like a SAA. This does make them a bit safer than the originals.
        Where are we going and why are we in this handbasket???

        Comment


        • #5
          Re: Colt Peacemaker clone

          I like the Ruger a lot better. The original is very different, but the Ruger is a better gun, much stronger, more reliable, safer and more fun (to me) to shoot. Well they are both fun to shoot, but one can be shot and one can be shot and actually worn and used (that being the Ruger). The New Vaqueros are very nice (I have new and old) and are well balanced. They give you the look and feel of a Colt but with a much better mechanism.
          How miserable that man is that governs a People where six parts of seven at least are poor, indebted, discontented, and armed. - William Berkley... Royal Governor of the Colony of Virginia (1670'ish).

          Comment


          • #6
            Re: Colt Peacemaker clone

            I'll have to look into the Rugers. Thanks.

            Comment


            • #7
              Re: Colt Peacemaker clone

              I own a few Ruger Vaquero's. I converted them to be "closer" to the true "single action"........that the old Colts have, with the "Power Custom" hammer kits.......and they are VERY nice revolvers!!

              BUT!!! I will not be happy, until I own a TRUE Colt single action. It is sort of akin to riding a Japanese "Harley", instead of actually riding a.........HARLEY- DAVIDSON!!!!!! (I cannot afford one of those either!! LOL!!!)
              Last edited by Led; July 21st, 2012, 14:38.
              And I saw thrones, and they sat upon them, and judgement was given unto them: and I saw the souls of them that were beheaded for the witness of Jesus, and for the word of God, and which had not worshipped the beast, neither his image, neither had received his mark upon their foreheads, or in their hands: and they lived and reigned with Christ a thousand years. Rev. Chap.20 Vs.4)

              Comment


              • #8
                Re: Colt Peacemaker clone

                What is the "Power Custom" hammer kit? Wifeyperson is leaning towards the Rugers.

                Comment


                • #9
                  Re: Colt Peacemaker clone

                  Originally posted by 1911cc View Post
                  What is the "Power Custom" hammer kit? Wifeyperson is leaning towards the Rugers.
                  It is a custom made hammer and trigger combo, that mimicks the "three click" cocking of a true single action.

                  It also lines up the cylinder to the loading gate, for easy unloading/loading. That can be done in the dark, with this kit. Rugers from the factory, do not do this.......

                  They are not cheap. But WELL worth the expense......




                  Ruger Single Action Hammer & Trigger Kits
                  Allows for a 2 to 3 Pound trigger pull for all new Model Large Frame Single Action Blackhawks, Super Blackhawks, and Vaqueros. Make Ruger Single Actions feel more like Colt Single Action. When on Halfcock, open the loading gate- chambers line up with the loading gate for ease of operation, spin the cylinder & hear the pawl sing. On Hammer draw you can hear and feel 3 postive clicks. Wolff Spring Kit includes 3 different reduced power hammer springs, (17lbs, 18lbs, and 19lbs), a reduced power trigger spring, and 1 extra power cylinder latch pin spring (minor modifications are required to some factory parts). Includes detailed instructions.

                  Ruger Single Action Hammer & Trigger Kit
                  Blue
                  Stainless Finish
                  BUY
                  $159.95
                  $179.95
                  Ruger Single Action Hammer Only
                  Blue
                  Stainless Finish
                  BUY
                  $108.37
                  $118.37
                  Ruger Single Action Trigger Only
                  Blue
                  Stainless Finish
                  BUY
                  $36.67
                  $46.67
                  Wolff Spring KitBUY
                  $18.11
                  Ruger Single Action Bisley Hammer
                  with half-cock notch, E.D.M. and CNC machined. Finished in complete black oxide. Designed to replace the factory BlackHawk hammer to allow for a better, lower profile, wide spur. It is best to be used with the Power Custom Ruger Single Action Vaquero/Black Hawk Trigger. The factory trigger may be altered as per detailed instructions. Using the Power Custom Black Hawk trigger, the trigger pull will weigh about 2 1/4lbs with the Wolff reduced power spring kit and approx. 3 to 31/4 lbs with the factory springs. Requires minor modification to the transfer bar to allow the gate to be opened when on half cock. The rear of the hammer radius is larger then the BlackHawk/Vaquero Hammers. This fills in the big gap that is at the rear of the hammer at the top of the back strap of the factory Revolver.
                  Ruger Single Action Bisley Hammer &
                  Bisley Trigger Kit w/Wolff Spring Kit
                  Blue
                  Stainless Finish
                  BUY

                  $179.95
                  $199.95
                  Ruger Single Action Bisley Hammer &
                  Black Hawk Trigger Kit w/Wolff Spring Kit
                  Blue
                  Stainless Finish
                  BUY

                  $179.95
                  $199.95
                  Ruger Single Action Bisley Hammer Only
                  Blue
                  Stainless Finish
                  BUY
                  $129.95
                  $139.95
                  Ruger Single Action Bisley Trigger Only
                  Blue
                  Stainless Finish
                  BUY
                  $39.95
                  $49.95
                  Ruger Single Action Black Hawk Trigger Only
                  Blue
                  Stainless Finish
                  BUY
                  $39.95
                  $49.95
                  Wolff Single Action Spring KitBUY
                  $18.11
                  PPC Heavy Vented Underlug
                  Conveniently add weight to your PPC revolver. Fits bull 1.062" Bull Barrelled revolvers. Vented design for increased cooling capabilities.
                  Stainless Steel
                  $61.66
                  BUY

                  (picture not available)Barricade Finger Stop$19.95
                  BUYS&W Competition Hands
                  Oversize hands to aid the gunsmith to fit all S&W K, L, & N frame revolvers. They are machined from tool steel.

                  $25.00
                  BUY
                  "K" Frame Hand "L" Frame Hand "N" Frame HandCrane Lock Ball & Spring Kit
                  Stainless Crane Lock Ball & Spring Kit- Conveniently add extra ball locks to your Custom Revolver.

                  Crane Ball Kit with Punch. Includes 20 Balls and 20 Springs$19.60
                  BUY
                  Crane Ball Refill Kit. Includes 10 Balls and 10 Springs$8.00
                  BUYScope Ring Base Stock
                  Weaver Style Aluminium Blanks ready for custom Machined Bases. A full 9/16" thick. Available in 9" or 18" stock.

                  BUY9" Scope Base Stock$14.2018" Scope Base Stock$25.00Stainless Cylinder End Shake Bearings
                  Eliminates Excessive Cylinder Endplay. 10 Per Pack
                  $18.00
                  BUYPY-2 .002" Yoke BearingsPC-2 .002" K,L,N Endshake BearingsPC-4 .004" K,L,N Endshake BearingsPC-J2 .002" J Frame Endshake BearingsPC-R2 .002" Ruger DA Revolver Endshake BearingPC-CSA .002" Colt SA Endshake BearingPC-WH#1 K,L,N Hammer ShimsPC-WT#2 K,L,N Trigger ShimsStainless Yoke Bearings
                  Eliminates Excessive Yoke Endplay
                  $18.00
                  BUYStainless S&W Hammer & Trigger Sideplate Shims
                  Eliminates Excessive side to side movement between the Hammer and Trigger Sideplate. This will enhance your trigger pull significantly.
                  $18.00
                  BUYUniversal Base Pin Bushing
                  Bushing is machined into cylinder to eliminate cylinder endshake for improved accuracy in single action revolvers. Both
                  include 4 .002 endshake bearings.
                  $34.95
                  BUY
                  Bushing Kit #1 (Rugers) Contains 1 bushing with I.D. reamed to .248.Bushing Kit#2 (Colt & Clones) Contains 1 bushing with I.D. reamed to .250. Patent # 6,385,888

                  Free Spin Pawl
                  This allow the shooter to take advantage of being able to rotate the cylinder in either direction for easy reloading. Works when the gate is opened. Might require some gunsmithing alterations. Designed for Ruger Vaquero, Blackhawks, Super Blackhawks, some Clones, and Single Six.
                  $34.95
                  BUY
                  And I saw thrones, and they sat upon them, and judgement was given unto them: and I saw the souls of them that were beheaded for the witness of Jesus, and for the word of God, and which had not worshipped the beast, neither his image, neither had received his mark upon their foreheads, or in their hands: and they lived and reigned with Christ a thousand years. Rev. Chap.20 Vs.4)

                  Comment


                  • #10
                    Re: Colt Peacemaker clone

                    I was looking at the Vaquero, from what I can see it is no longer offered in the case hardened color, just blued. Still think her choice might be a Ruger though.

                    Comment


                    • #11
                      Re: Colt Peacemaker clone

                      I have a whole bunch of Ruger Old Model Blackhawk and Super Blackhawk revolvers. I much prefer them to the New Models, including the Vaqueros. I think it was about 1973 when Ruger caved to the anti-gun zealots and lawyers and made the changes resulting in the New Model. Those took away the half-cock to release the cylinder (now done by opening the loading gate) and put in the transfer bar (to prevent discharging a cartridge by dropping the gun on its hammer). Ruger also developed a modification for its Old Model revolvers that added a transfer bar, but left the rest of the lockwork unchanged. IMHO, they should have just stopped with that instead of developing the New Model: those guns don't have the chambers line up with the ejection rod when the pawl clicks and one has to actually hold the cylinder lined up to eject cartridges! In the Old Models, it is possible to unload the cylinder just by listening--not so with the New Models.

                      flashguy
                      When they ask me, "Paper or plastic?" I just say, "Doesn't matter to me. I am bi-sacksual."

                      Texan by choice, not accident of birth

                      Comment


                      • #12
                        Re: Colt Peacemaker clone

                        IMO whether you like the transfer bar safety or not, the New Vaqueros are better handling than the older heavier ones (and I have both). While I still like the ability to shoot full power .45 Colt rounds in the older "New Vaqueros" in .45 C, and I wish that option was still around for full power freaks which include me, when it comes to .357 the new ones win in every category. They are just better handling, and to me subjectively look better (notice how I used .45 C.... since there is no such thing as .45 LC... just .45 C and .45 ACP... and well a few other .45 variants as well... but no such thing as .45 LC).

                        Anyway my point is to just buy the Ruger Vaquero... in .357 mag... especially since it is for the wifey.
                        Last edited by Southern Shark; July 22nd, 2012, 08:04.
                        How miserable that man is that governs a People where six parts of seven at least are poor, indebted, discontented, and armed. - William Berkley... Royal Governor of the Colony of Virginia (1670'ish).

                        Comment


                        • #13
                          Re: Colt Peacemaker clone

                          She wants the .45 C. Tried to steer her towards the .357 but no go. She shoots my 1911's with no problem so she figures the .45 Vaquero will be fine. If not I'll get her one in .357, she can shoot .38's in it, and I'll end up with a .45.

                          Comment


                          • #14
                            Re: Colt Peacemaker clone

                            Originally posted by 1911cc View Post
                            She wants the .45 C. Tried to steer her towards the .357 but no go. She shoots my 1911's with no problem so she figures the .45 Vaquero will be fine. If not I'll get her one in .357, she can shoot .38's in it, and I'll end up with a .45.
                            Oh its totally manageable in 45 Colt. I just like the .357 better because it is a full power round, whereas the .45 Colt is a bit shy on horse power. I figure the .357 gives me more options and ammo is easier to obtain (and cheaper). You won't have any more recoil with standard .45 Colt than you would with .357 (if anything you will have less). Now full power .45 Colt is a different story, but factory ammo is light and easily manageable for everyone involved. Of course .38 special has even less recoil, but I usually shoot .357 in mine (although I don't do cowboy action shooting, and if I did I would probably use .38 special or might even go with the .45 Colt as your wife wants to do). I like the little push that .357 gives.... lets me know the gun went off.
                            How miserable that man is that governs a People where six parts of seven at least are poor, indebted, discontented, and armed. - William Berkley... Royal Governor of the Colony of Virginia (1670'ish).

                            Comment


                            • #15
                              Re: Colt Peacemaker clone

                              She says, "The old guns were .45 and that's what I want". Who am I to argue with that.

                              A local collector has John Waynes gun and holster rig that he used most of his career, the one with the tea stained grips and three finger grooves. She saw that and it just intensified her desire to have one. No doubt in my mind she'll have a real one before she's done.
                              Last edited by 1911cc; July 22nd, 2012, 11:12. Reason: spelling

                              Comment

                              Working...
                              X