1 of 4 < >

Check 'Display Signatures' in user area.

If you want to see signatures at the bottom of member's posts, check your user area and make sure this box is checked. The default mode is 'Off'.
2 of 4 < >

Strike Through Text Option now on-line

You may now use the Strike Through option in the post text editor.

There is a square blank button located at the end of the options on the right. I could not get the 'S' to show up, but the button still works.
3 of 4 < >

Reload your Avatars

If you wish to have your avatar visible again you will have to reload it to the board. The old avatars did not transfer to the new file system.

Stay tuned for more.
4 of 4 < >

Contributor Status Titles

Gentlemen, Assault Web greatly appreciated your monetary contributions to keep this forum alive and running as we make the transition to a new server and upgraded software.

I have been working to upgrade title for those members who have made a monetary contribution to the form. Unfortunately, I have been met by some resistance to comply by the forum software and I am unable to make these administrative changes.

Your donations have been duly noted and at such time the forum software is upgraded, so will your status.

The Back Room
See more
See less

Saiga Feed Ramp

  • Filter
  • Time
  • Show
Clear All
new posts

  • Saiga Feed Ramp

    I am planning on doing a Saiga 7.62 conversion soon. I think I'll use the black pipe method for the feed ramp. I would like to see pictures of someones Saiga with the black pipe for a feed ramp. You can E-mail them to me at if you don't want to post them. Also I'm not sure if I'm going to drill and tap it in or mig weld it. If I mig weld it do I have to be careful with temp. so as to not soften or lose temper on the metal being welded to?

  • #2
    Do a search ,"Saiga Conversion" Bossman has the scoop.